Dielectric behavior of PVDF/POMA blends that have a low doped POMA content

The real (ε′) and imaginary (ε″) components of the complex permittivity of blends of PVDF [poly(vinylidene fluoride)] with POMA [poly(o‐methoxyaniline)] doped with toluenosulfonic acid (TSA) containing 1, 2.5, and 5 wt % POMA–TSA were determined in the frequency interval between 10² and 3 × 10⁶ Hz and in the temperature range from ?120 up to 120°C. It was observed that the values of ε′ and ε″ had a greater increase with the POMA–TSA content and with a temperature in the region of frequencies below 10 kHz. This effect decreased with frequency and it was attributed to interfacial polarization. This polarization was caused by the blend heterogeneity, formed by conductive POMA–TSA agglomerates dispersed in an insulating matrix of PVDF. The equation of Maxwell–Garnett, modified by Cohen, was used to evaluate the permittivity and conductivity behavior of POMA–TSA in the blends. A strong decrease was observed in POMA–TSA conductivity in the blend, which was bigger the lower the POMA–TSA content in the blend. This decrease could have been caused either by the POMA dedoping during the blend preparation process or by its dispersion into the insulating matrix. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 752–758, 2003     

Data collection in global software engineering research: learning from past experience

Global Software Engineering has become a standard in today’s software industry. Research in distributed software development poses severe challenges that are due to the spatial and temporal distribution of the actors, as well as to language, intercultural and organizational aspects. These challenges occur in addition to “traditional” challenges of the domain itself in large-scale software projects, like coordination and communication issues, requirements volatily, lack of domain knowledge, among others. While several authors have reported empirical studies of global software development projects, the methodological difficulties and challenges of this type of studies have not been sufficiently discussed. In this paper, we share our experiences of collecting and analysing qualitative data in the context of Global Software Engineering projects. We discuss strategies for gaining access to field sites, building trust and documenting distributed and complex work practices in the context of several research projects we have conducted in the past 9 years. The experiences described in this paper illustrate the need to deal with fundamental problems, such as understanding local languages and different cultures, observing synchronous interaction, or dealing with barriers imposed by political conflicts between the sites. Based on our findings, we discuss some practical implications and strategies that can be used by other researchers and provide some recommendations for future research in methodological aspects of Global Software Engineering.     

Design recommendations for camera-based head-controlled interfaces that replace the mouse for motion-impaired users

This work focuses on camera-based systems that are designed for mouse replacement. Usually, these interfaces are based on computer vision techniques that capture the user’s face or head movements and are specifically designed for users with disabilities. The work identifies and reviews the key factors of these interfaces based on the lessons learnt by the authors’ experience and by a comprehensive analysis of the literature to describe the specific points to consider in their design. These factors are as follows: user features to track, initial user detection (calibration), position mapping, feedback, error recovery, event execution, profiles and ergonomics of the system. The work compiles the solutions offered by different systems to help new designers avoid problems already discussed by the others.     

Random Copolymers with 2,2′-Dioxy-1,1′-biphenyl-phosphazene and Chiral 2,2′-dioxy-1,1′-binaphthylphosphazene Units Functionalized in the 6,6′-Positions with PPh<Subscript>2</Subscript> Groups as Precursors for Ru(arene) Catalysts

The chiral phosphazene copolymers {[NP(O₂C₁₂H₈)]_0.9[NP(O₂C₂₀H₁₂)]_0.1} (1) and {[NP(O₂C₁₂H₈)]_0.9[NP(O₂C₂₀H₁₀Br₂)]_0.1} _n (2) [(O₂C₁₂H₈) = 2,2′-dioxy-1,1′-biphenyl; (O₂C₂₀H₁₂) = R-2,2′-dioxy-1,1′-binaphthyl and (O₂C₂₀H₁₀Br₂) = R-6,6′-dibromo-2,2′-dioxy-1,1′-binaphthyl] were prepared by sequential substitution from [NPCl₂] _n and the corresponding dihydroxy-biphenyl or binaphthyl reagents in the presence of Cs₂CO₃ and K₂CO₃. The reaction of (2) with ^tBuLi in THF, followed by addition of PPh₂Cl and a treatment with SiHCl₃/PPh₃ to eliminate any oxidized OC₆H₄P(O)Ph₂ groups, gave the phosphine containing copolymer {[NP(O₂C₁₂H₈)]_0.9[NP(O₂C₂₀H₁₀[PPh₂]₂)]_0.1} _n (3), that was used as a chiral ligand to support [Ru(p-cymene)Cl] complexes. The resulting catalyst was active for hydrogen transfer from isopropyl alcohol to acetophenone but the placement of the Ru centers in the 6,6′-positions of the binaphthoxyphosphazene units induced no enantioselectivity. Dedicated to Professor Christopher Allen.     

Biochemical,functional, and histochemical effects of essential fatty acid deficiency in rat kidney

The present study was designed to examine the effects of EFA deficiency (EFAD) on biochemical, functional, and structural aspects of the kidney in growing and adult rats fed a normal or EFAD diet for 9 wk after weaning. Food and fluid intake (FI), urine volume, and Na⁺ and K⁺ excretions were measured weekly from weeks 4 to 8 by placing the rats in individual metabolic cages for 24 h. At week 9, Li⁺ and a 5% water load, respectively, were administered at 14 and 1.5 h prior to glomerular and proximal tubular function studies, as assessed by 3-h creatinine (C_Cr) and Li⁺ (C_Li+) clearances. Hematocrit and urine volume; serum and urine [Cr], [Li⁺], [Na⁺], and [K⁺]; and renal FA distribution were also measured. Data [corrected to 100 g/body weight (bw) and presented as means ±SEM] were significant, at P<-0.05. Despite a similar ingestion of solids from weeks 4 to 7 (weeks 7 to 10 of life), the rats on the EFAD diet showed a decreased body weight from week 5. From weeks 4 to 8, Fl and urine volume were similar for both groups, but the Fl increased at week 6 in the EFAD group; 24-h Na⁺ and K⁺ excretions were similar at all weeks, except for an increase in the EFAD group for both ions at week 7. In the EFAD group, C_Cr and C_Li+ decreased by 27 and 56.3%, respectively (385.7±33.4 vs. 280±21.1, and 21.0±2.1 vs. 9.2±1.1 μL/min/100 g; n=9 vs. 10), the latter result suggesting increased proximal reabsorption. The 3-h Na⁺ and K⁺ excretions were similar, but the Li⁺ decreased (0.78±0.06×10⁻² vs. 0.32±0.03×10⁻² μeq/min/100 g) in the EFAD group, giving additional support to the suggestion. Renal structure was normal and similar for both groups, but the EFAD group showed a more prominent proximal tubule brush border, together with heavier periodic acid-Schiff staining in all specimens from weeks 5 to 9. In the EFAD group, FA of the n−9 and n−7 series were higher, but most of the n−6 series were lower as a percentage of total lipids in the medulla and cortex. Medullary levels of 20∶4n−6 were maintained, 22∶4n−6 declined twice, arachidonic acid was maintained, and 20∶5n−3 was lower. The EFAD diet affected glomerular function, proximal tubular structure and function, and FA distribution in the rat kidney.     

Method for Production of α-Alumina Whiskers via Vapor-Liquid-Solid Deposition

α-alumina (α-Al₂O₃, corundum) fibers exhibit high thermal and chemical stability, as well as good mechanical properties, even at high temperatures. Such characteristics make them good candidates for use in composites. Nevertheless, very few methods of producing α-Al₂O₃ fibers are available. In the present work, we describe a method that uses aluminum pieces deposited on SiO₂ powder, in an argon atmosphere, at temperatures in the range 1300°–1600°C. The α-Al₂O₃ fibers are obtained via vapor-liquid-solid deposition. The novel addition of nickel and cobalt (or their oxides) allows the use of temperatures >1500°C, resulting in improved fiber production. We demonstrate that the metals do not contaminate the fibers produced in this way. Finally, we also estimate the tensile strength of the Al₂O₃ fibers produced through this method.     

Classification of vegetable oils by high-resolution <Superscript>13</Superscript>C NMR spectroscopy using chromatographically obtained oil fractions

¹³C NMR spectra of oil fractions obtained chromatographically from 109 vegetable oils were obtained and analyzed to evaluate the potential use of those fractions in the classification of vegetable oils and to compare the results with the NMR analysis of complete oils. The oils included the following: virgin olive oils from different cultivars and regions of Europe and north Africa; “lampante” olive, refined olive, refined olive pomace, hazelnut, rapeseed, high-oleic sunflower, corn, grapeseed, soybean, and sunflower oils; and mixtures of virgin olive oils from different geographical origins. Oils were divided into two sets of samples. The training set (98 samples) was employed to select the variables that resulted in significant discrimination among the different oil classes. By using stepwise discriminant analysis, more than 98% of correct validated assignments were obtained; these results were confirmed when applied to the test set (11 blind samples). Results suggest that the use of oil fractions considerably increases the discriminating power of NMR in the analysis of vegetable oils.     

Isolation of the trail recruitment pheromone ofSolenopsis invicta

TheSolenopsis invicta trail pheromone is synthesized by the Dufour's gland and is released through the sting apparatus. The recruitment subcategory of theS. invicta trail pheromone was shown to be composed of a mixture of the orientation pheromone, (Z,E)--farnesene and an unidentified homosesquiterpene consisting of three rings and one double bond (C-1). C-1 is present in worker Dufour's glands at only 75 pg per worker equivalent. This is the first report that demonstrates that different exocrine products from the same gland control different subcategories of behavior related to mass recruitment.     

Organo-zincate molten salts as immobilising agents for organometallic catalysis

The combination of 1-n-butyl-3-methylimidazolium chloride with ZnCl₂ affords ionic mixtures with different melting point temperatures depending on the zinc molar fraction. RuCl₂(PPh₃)₃ immobilised in the low melting mixture (60°C) promotes the 1-hexene hydrogenation (turnover frequencies up to 44 min^–1) and the recovered solid catalyst phase can be reused several times.